Third and final PR to address
https://github.com/coder/coder/issues/16230.
This PR enables GitHub OAuth2 login by default on new deployments.
Combined with https://github.com/coder/coder/pull/16629, this will allow
the first admin user to sign up with GitHub rather than email and
password.
We take care not to enable the default on deployments that would upgrade
to a Coder version with this change.
To disable the default provider an admin can set the
`CODER_OAUTH2_GITHUB_DEFAULT_PROVIDER` env variable to false.
Niche edge case, assumes access_token is jwt.
Some `access_token`s are JWT's with potential useful claims.
These claims would be nearly equivalent to `user_info` claims.
This is not apart of the oauth spec, so this feature should not be
loudly advertised. If using this feature, alternate solutions are preferred.
Provisioner key permissions were never any different than provisioners.
Merging them for a cleaner permission story until they are required (if
ever) to be seperate.
This removed `ResourceProvisionerKey` from RBAC and just uses the
existing `ResourceProvisioner`.
It's sometimes useful to see when each pong was received, for
correlating these times with other events.
---------
Signed-off-by: Danny Kopping <danny@coder.com>
First PR in a series to address
https://github.com/coder/coder/issues/16230.
Introduces support for logging in via the [GitHub OAuth2 Device
Flow](https://docs.github.com/en/apps/oauth-apps/building-oauth-apps/authorizing-oauth-apps#device-flow).
It's previously been possible to configure external auth with the device
flow, but it's not been possible to use it for logging in. This PR
builds on the existing support we had to extend it to sign ins.
When a user clicks "sign in with GitHub" when device auth is configured,
they are redirected to the new `/login/device` page, which makes the
flow possible from the client's side. The recording below shows the full
flow.
https://github.com/user-attachments/assets/90c06f1f-e42f-43e9-a128-462270c80fdd
I've also manually tested that it works for converting from
password-based auth to oauth.
Device auth can be enabled by a deployment's admin by setting the
`CODER_OAUTH2_GITHUB_DEVICE_FLOW` env variable or a corresponding config
setting.
This commit adds new audit resource types for workspace agents and
workspace apps, as well as connect/disconnect and open/close actions.
The idea is that we will log new audit events for connecting to the
agent via SSH/editor.
Likewise, we will log openings of `coder_app`s.
This change also introduces support for filtering by `request_id`.
Updates #15139
This change adds provisioner daemon ID filter to the provisioner daemons
endpoint, and also implements the limiting to 50 results.
Test coverage is greatly improved and template information for jobs
associated to the daemon was also fixed.
Updates #15084
Updates #15192
Related #16532
Since API keys can be created without a name, and we already perform the
deletion by ID, it makes sense to be able to delete tokens with *just*
the ID.
Fixes https://github.com/coder/coder/issues/16268
- Adds `/api/v2/workspaceagents/:id/containers` coderd endpoint that allows listing containers
visible to the agent. Optional filtering by labels is supported.
- Adds go tools to the `coder-dylib` CI step so we can generate mocks if needed
As requested for [this
issue](https://github.com/coder/internal/issues/245) we need to have a
new resource `resources_monitoring` in the agent.
It needs to be parsed from the provisioner and inserted into a new db
table.
Another PR to address https://github.com/coder/coder/issues/15109.
Changes:
- Introduces the `--ephemeral` flag, which changes the Coder config
directory to a temporary location. The config directory is where the
built-in PostgreSQL stores its data, so using a new one results in a
deployment with a fresh state.
The `--ephemeral` flag is set to replace the `--in-memory` flag once the
in-memory database is removed.
As we worked on adding a `open_in` parameter for workspace_apps - we
initially created three options :
- window
- slim_window
- tab
After further investigation, `window` should not be used and has to be
removed.
ℹ️ I decided to remove the option instead of deprecating it as we've not
created any release nor documented the feature. Can be discussed.
This adds a flag matching `--ssh-host-prefix` from `coder config-ssh` to
`coder ssh`. By trimming a custom prefix from the argument, we can set
up wildcard-based `Host` entries in SSH config for the IDE plugins (and
eventually `coder config-ssh`).
We also replace `--` in the argument with `/`, so ownership can be
specified in wildcard-based SSH hosts like `<owner>--<workspace>`.
Replaces #16087.
Part of https://github.com/coder/coder/issues/14986.
Related to https://github.com/coder/coder/pull/16078 and
https://github.com/coder/coder/pull/16080.
This is the first in a series of PRs to enable `coder ssh` to replace
`coder vscodessh`.
This change adds `--network-info-dir` and `--network-info-interval`
flags to the `ssh` subcommand. These were formerly only available with
the `vscodessh` subcommand.
Subsequent PRs will add a `--ssh-host-prefix` flag to the ssh
subcommand, and adjust the log file naming to contain the parent PID.
Change as part of https://github.com/coder/coder/pull/16071
It has been decided that we want to be able to have some notification
templates be disabled _by default_
https://github.com/coder/coder/pull/16071#issuecomment-2580757061.
This adds a new column (`enabled_by_default`) to
`notification_templates` that defaults to `TRUE`. It also modifies the
`inhibit_enqueue_if_disabled` function to reject notifications for
templates that have `enabled_by_default = FALSE` with the user not
explicitly enabling it.
RE: https://github.com/coder/coder/issues/15740,
https://github.com/coder/coder/issues/15297
In order to add a graph to the coder frontend to show user status over
time as an indicator of license usage, this PR adds the following:
* a new `api.insightsUserStatusCountsOverTime` endpoint to the API
* which calls a new `GetUserStatusCountsOverTime` query from postgres
* which relies on two new tables `user_status_changes` and
`user_deleted`
* which are populated by a new trigger and function that tracks updates
to the users table
The chart itself will be added in a subsequent PR
---------
Co-authored-by: Mathias Fredriksson <mafredri@gmail.com>
Second step to resolve [open_in
issue](https://github.com/coder/terraform-provider-coder/issues/297)
This PR improves the way the open_in parameter is forwarded across the
code, changing the last `string` to const everywhere.
Also make sure it is available and forwarded up to the `CreateLink`
component.
This PR changes template names and docs to follow the
`<provider>-<os/whatever>` format for all templates.
I've decided not to split this into multiple PRs because I'd have to
edit rebase the other PRs once one of them gets merged, this should be
relatively low-impact anyways.
This aligns with our goals to make templates more user-friendly.
Closes#15754
Relates to https://github.com/coder/coder/issues/15082
Further to https://github.com/coder/coder/pull/15429, this reduces the
amount of false-positives returned by the 'is eligible for autostart'
part of the query. We achieve this by calculating the 'next start at'
time of the workspace, storing it in the database, and using it in our
`GetWorkspacesEligibleForTransition` query.
The prior implementation of the 'is eligible for autostart' query would
return _all_ workspaces that at some point in the future _might_ be
eligible for autostart. This now ensures we only return workspaces that
_should_ be eligible for autostart.
We also now pass `currentTick` instead of `t` to the
`GetWorkspacesEligibleForTransition` query as otherwise we'll have one
round of workspaces that are skipped by `isEligibleForTransition` due to
`currentTick` being a truncated version of `t`.
- Refactors `checkProvisioners` into `db2sdk.MatchedProvisioners`
- Adds a separate RBAC subject just for reading provisioner daemons
- Adds matched provisioners information to additional endpoints relating to
workspace builds and templates
-Updates existing unit tests for above endpoints
-Adds API endpoint for matched provisioners of template dry-run job
-Updates CLI to show warning when creating/starting/stopping/deleting
workspaces for which no provisoners are available
---------
Co-authored-by: Danny Kopping <danny@coder.com>
